No products in the cart.
XMT® 400 ARCREACH®, DINSE® WELDING MACHINE
208 V XMT® with ArcReach® Technology, Cable Length Compensation, and Auto-Line™ Technology enhances welding efficiency and control. This multiprocess power source supports CC/CV welding for versatile applications.
| Technical Specifications | ||
|---|---|---|
| Processes | MIG (GMAW)
Flux-cored (FCAW) Accu-Pulse® (GMAW-P)* Versa-Pulse™ (GMAW-P)** High-deposition MIG (GMAW)** RMD® (Regulated Metal Disposition)*** With Intellx™ Pro and Intellx™ Elite feeders. **With Intellx™ Elite feeders. |
|
| Heavy Industrial |
|
|
| Input Power | 208/230/460 V or 575 V, 3-phase, 60 Hz 230 V, 1-phase, 60 Hz |
|
| Rated Output | 350 A at 60% duty cycle | |
| Wire Diameter | Single-wire:16.25 x 12.38 x 27.88 in. (413 x 314 x 708 mm)
Dual-wire: 14 x 18 x 34.5 in. (356 x 457 x 876 mm) |
|
| Wire Feed Speed | 50–780 ipm (1.3–19.8 m/min.) | |
| Net Weight | 34.9 Kg | |
| Dimensions (HxWxD) | 356 x 457 x 876 mm | |
Features
ArcReach® TechnologyArcReach capabilities increase jobsite productivity and efficiency by eliminating the time spent tracing weld cables hundreds of feet back to the power source because weld operators can make voltage adjustments at the ArcReach wire feeder or remote.
|
Cable Length CompensationCable Length Compensation (CLC™) ensures that the voltage a weld operator sets is the voltage they get by automatically adjusting voltage based on weld cable length, even hundreds of feet away from the power source.
|
Auto-Line™ TechnologyAllows hookup to either single-phase or three-phase primary input voltage, 208-600 volts dependent on the machine, with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.
|
Adjust While WeldingWeld operators have more control and can Adjust While Welding (AWW™) to make fast, easy weld parameter changes at the wire feeder or remote — even while the arc is on. Only Miller offers this advanced solution.
|
Improved Jobsite SafetyThe chances of slip, trip and fall injuries are decreased because ArcReach technology allows weld operators to make parameter changes at the wire feeder or remote instead of having to travel through multistory and cluttered jobsites back to the power source.
|
ArcReach Heater CompatibilityTake charge of your field preheat and bakeout applications up to 600 degrees Fahrenheit (315°C). This system uses induction heating to generate heat in workpieces, so welders can do their own preheating quickly and safely. A part of the ArcReach technology platform, the ArcReach Heater is an accessory for select ArcReach welding power sources.
|
Control Panel Lock OutInadvertent parameter changes by other jobsite workers can be avoided because connecting an ArcReach accessory to the power source automatically locks out the power source’s panel controls.
|
|
|
- Warranted: three years



















