No products in the cart.
XMT® 400 WELDING MACHINE
208 V, XMT® multiprocess power source delivers up to 425 A. Features ArcConnect™, Legacy meets pulse, and Auto-Line™ Technology for flexible, reliable welding across materials and varying power conditions.
| Technical Specifications | ||
|---|---|---|
| Processes | MIG (GMAW)
Flux-cored (FCAW) Accu-Pulse® (GMAW-P)* Versa-Pulse™ (GMAW-P)** High-deposition MIG (GMAW)** RMD® (Regulated Metal Disposition)*** With Intellx™ Pro and Intellx™ Elite feeders. **With Intellx™ Elite feeders. |
|
| Heavy Industrial |
|
|
| Input Power | 208/230/460 V or 575 V, 3-phase, 60 Hz 230 V, 1-phase, 60 Hz |
|
| Rated Output | 350 A at 60% duty cycle | |
| Wire Diameter | Single-wire:16.25 x 12.38 x 27.88 in. (413 x 314 x 708 mm)
Dual-wire: 14 x 18 x 34.5 in. (356 x 457 x 876 mm) |
|
| Wire Feed Speed | 50–780 ipm (1.3–19.8 m/min.) | |
| Net Weight | 34.9 Kg | |
| Dimensions (HxWxD) | 356 x 457 x 876 mm | |
Features
ArcConnect™Next generation communication to improve weld performance and allow point-of-use controls to be located at the feeder.
|
Legacy meets pulsePulsed MIG-capable with Intellx Pro or Elite feeder provides a 28-percent wider operating window and a more forgiving arc, compensating for variations in operator technique. Welders of any skill level can get into production quicker.
|
Auto-Line™ TechnologyAllows hookup to either single-phase or three-phase primary input voltage, 208-600 volts dependent on the machine, with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.
|
Wind Tunnel Technology™Internal air flow that protects internal components from dirt, dust, debris— greatly improving reliability.
|
Dedicated wire feeder optionsIntellx Elite feeder — New arc control feature means welders can produce better welds with minimal parameter adjustments. Intellx Pro feeder — Adds Accu-Pulse®, EZ-Set, steel weld programs, and memory buttons.
|
Fan-On-Demand™Power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminants pulled through machine.
|
Auto Remote Sense™Enables unit to automatically use remote control if connected to remote control receptacle.
|
Backwards CompatibilityA model is available with both ArcConnect and the standard Miller 14 Pin for use with older Miller wirefeeders.
|
Easy to useEZ-Set simplifies parameter setup based on material thickness, removing complexity and reducing welder training time.
|
Ready to weldThe welding system is shipped as a complete package with everything you need to get welding sooner. Just hook up your primary power, add gas, wire and a welding gun, and you're ready to weld. |
|
|
- Warranted: three years

















