No products in the cart.
PLAY VIDEO
MAXSTAR 161 STH WELDING MACHINE
The Maxstar 161 Series provides maximum portability and performance in the most compact TIG/Stick packages in the industry. Dependability and performance all in one machine.
| Technical Specifications | ||
|---|---|---|
| Processes | MIG (GMAW)
Flux-cored (FCAW) Accu-Pulse® (GMAW-P)* Versa-Pulse™ (GMAW-P)** High-deposition MIG (GMAW)** RMD® (Regulated Metal Disposition)*** With Intellx™ Pro and Intellx™ Elite feeders. **With Intellx™ Elite feeders. |
|
| Heavy Industrial |
|
|
| Input Power | 208/230/460 V or 575 V, 3-phase, 60 Hz 230 V, 1-phase, 60 Hz |
|
| Rated Output | 350 A at 60% duty cycle | |
| Wire Diameter | Single-wire:16.25 x 12.38 x 27.88 in. (413 x 314 x 708 mm)
Dual-wire: 14 x 18 x 34.5 in. (356 x 457 x 876 mm) |
|
| Wire Feed Speed | 50–780 ipm (1.3–19.8 m/min.) | |
| Net Weight | 34.9 Kg | |
| Dimensions (HxWxD) | 356 x 457 x 876 mm | |
Features
Compact Design Allows for Great PortabilityWeighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based machine can be taken from location to location.
|
Use on 120 AND 240 Volt Input PowerSeparate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles.
|
Low Power DrawBy utilizing an inverter-based power source in the Maxstar® 161, superior arc starts and excellent weld puddle control are provided in both the TIG and Stick settings - all in a small, light-weight package.
|
6010 Stick Electrode CapabilitySuperior Stick arc performance even on the difficult-to-run electrodes like E6010.
|
No More "Sticky" ElectrodesWith Miller's Adaptive Hot Start™ technology, you no longer have to worry about those difficult-to-strike electrodes.
|
Conserve Your ElectrodesWith the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.
|
No Need For A Gas Valve On Your TIG TorchWith a built-in gas solenoid, the Maxstar® 161 eliminates the need for a bulky TIG torch with a gas valve
|
5 Amp TIG CapabilityAllows users to weld thinner materials than other machines in this category.
|
Easy-to-Use1. Turn power on. 2. Select process: High-Frequency TIG, Lift-Arc™ TIG, Stick, or 6010 Stick. Set amperage. 3. Then weld! It’s as easy as 1, 2, 3.
|
Pro-Set™ FeatureThis feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters.
|
|
|
- Warranted: three years
